Stamp pads and stamps can be used together to embellish anything from a handmade card to a decorative box. Stamps are available in a wide range of colors and inks. The ink can be permanent or washable. Over time, ink pads can begin to dry out. Instead of throwing them away, it is best to re-ink them using an ink or pigment refill kit.
Check for defects
Before you can refill a stamp pad, you must first inspect it for defects. If there are tears or imperfections in the stamp itself, it is best to replace the stamp pad. If the stamp is in good condition, consider refilling it.
Choose a refill
Many ink pad manufacturers now offer ink refills that match their ink pad line. When you have a dried out ink pad, start by checking the manufacturer's name and the color of the ink pad. Check to see if there is a specific refill for that ink pad, as it is best to purchase the coordinating ink refill. If there is no matching ink, look for a different brand in the same color. This is easier for black, brown and primary colors, as they tend to be closer than custom colors.
Inspect the refill
Stamp ink refills are usually supplied in small plastic bottles. Underneath the screw cap is a small opening to dispense the ink. Keep your ink refills upright and with the cap securely in place to prevent leakage. One ink refill should give you multiple uses, depending on the size of the stamp and the ink needed to rejuvenate it.
Stamp pad refill
Once you have determined that your stamp pad is in good condition and you have a replacement ink available, you can go ahead and fill your stamp pad.
Step 1
Open your stamp pad and lay it flat on a table.
Step 2
Remove the cap from the ink bottle. Turn the bottle over along the top edge of the stamp pad. In a zigzagging motion, begin running the ink back and forth along the length of the stamp pad, pressing lightly as you go. Repeat this several times until you feel the pad is saturated.
Step 3
When you think you've added enough ink, use your stamp to do a test stamp. If the stamp is dark and even, you are done. If not, repeat step 2 and stamp again.
Warning
Be sure to read the manufacturer's instructions on the refill bottle. If they differ from these instructions, always follow the manufacturer's instructions first.
In the end, you should know that re-inking an ink pad that has dried out is not difficult. You simply have to follow the different steps. In addition, you should also take the trouble to buy a good quality ink pad. There are several that can perfectly meet your expectations.
All the material for the stamp pad
You may have guessed it before reading this article, but now you know it for a fact: to re-ink a stamp that has dried out, you simply need a refill. That's the whole problem with ink. When you use it, it's good for drying on paper, or canvas. But the problem is that when it dries where you put it, while writing or drawing, it dries just as much in the device you used. It is known, for example, that Rotring pens, which are used by all professional illustrators and drawers, because of the fine lines they offer, must be used several times a week to avoid damage. This is the advice you get when you buy an instrument of this kind. Given the price it costs, it is obvious that no one wants to see their lead dry up and become unusable after just one use!
As for the ink pads, it is the same problem, that's why it is recommended to have at your disposal all the material for your stampwhen you buy one. This gives your stamp a longer life, which means you won't have to buy another one in a short time. In the digital age, many people no longer use ink at all, even among illustration and design professionals. They prefer to use computer equipment, because it is accurate, reliable and easy to use most of the time. However, many of them come back to ink. The same is true for companies that opt for electronic signatures but realize, after a while, that the stamp pad is still very useful.
