The different water leaks on toilets and their repairs!

Toilet water leaks are incidents that can affect any household. If you encounter any problem with your toilet flush or tank, it would be good to think about getting them fixed. So, what should you know about different toilet leaks? How could you go about getting them fixed? 

 The overflow

Overflow is one of the most common problems that individuals encounter in their homes. Indeed, this leakage problem can be located at the float or the seal of the water inlet valve. 

This is a common problem and occurs due to a malfunction or deterioration of one of your parts. If you notice a problem like this, simply put the element back in place while making sure to move it down the shaft. In case you find that the mechanism is not adjustable, twist the rod and you're done. 

But note that if your float has worn out over time, it is advisable to remove it and replace it with an identical model.

It can help you out if the problem persists or if other related malfunctions occur. Furthermore, if the problem comes from your leaky gasket, you can disassemble the valve using a wrench to replace the defective accessory.

A defective tank

The water tank that has trouble filling is a problem that sometimes occurs because of the valve seal. In order to fix it, you must completely disassemble the tank. To do this, first remove the water valve, then disassemble the flush mechanism. Next, loosen the longer screws that secure the tank to the bowl. Once done, you'll have direct access to the flapper seal, which may be dirty. If you see tartness around the part, please clean it with white vinegar. However, if your gasket is damaged, then you need to get a new one, but of the same diameter.

  How to drink tap water? Precautions to take!

A leak behind the toilet tank 

Water leakage is a recurring problem that occurs when your tank has been gently moved. But if you've noticed this problem, all you have to do is tighten it up, taking care not to move the flushing mechanism and the flapper seal. If you don't see any change, it means that your seals are completely worn out. You should consider getting a new set so you can be safe for a while. 

On the other hand, when you notice that there is a water leak in your toilet, don't be careless, act immediately. The fact is that if you neglect a small water leak, you will waste about 10 liters of water every day. 

You'll be paying a huge bill, and on top of that, this minor problem could create a mess in your home as well as in your neighborhood. If you can't do the repair yourself, don't hesitate to call a certified plumber to fix the defective element for you at an affordable price. Just ask for an estimate and you will get a job that meets your expectations.

Share this article:
Previous

Water leakage and home insurance: what to do?

How do I repair a water leak at a fitting?

Next

Leave a Comment