A boiler is a crucial part of any home, unless you want to take freezing cold showers for the rest of your life. They are a special heating system for your home’s water and it is the boiler’s job to distribute the heat you need into your water; it is designed to warm the cool water returning to it, so the whole house can have hot or lukewarm water on those cold days.
If you’re planning to install one soon, here’s a step-by-step guide to help you.
Something to consider
Although most people like to have DIY installation plans, it would be beneficial if you hired a specialist to do it for you. It’s very easy these days and you won’t need a boiler engineer to inspect your house. Boiler installation professionals believe you can get quotes online and book any day for someone to come and install a boiler for you. The convenience of doing most of the process online and getting the 10-year warranty is more than enough to convince you to install it that way. You can choose the boiler you like online after finishing the comparison; it will be easier and it will save you a lot of time.
How to install a boiler?
In most cases, changing or replacing your old boiler with a new one at the same time can be a wise decision, as it makes the process much easier, but the benefits of replacing it with an energy-efficient and solid boiler seem to be more attractive for the people. Once you have determined the type of boiler you need, the appropriate size and where you need it, you should be ready to begin the process:
Removing the Old Boiler: Before you start removing or unscrewing anything, you need to turn off the gas to your house and then shut off the gas supply so you can safely plug it. Next, you need to manipulate the valves by isolating the boiler from your home’s water supply. After that, you can safely remove the gas pipe as it will no longer be needed; The next step would be to dismantle the boiler, so that you have room for the new one.
Change piping work: Most old boilers were designed to bring air back to the boiler and this was not very efficient. So you need to modify the pipes in such a way that you can add additional new piping in the middle with a filter and fan and remove any excess air through the installed vents.
In any case, it may be interesting to facilitate the assembly of your boiler by opting for the installation of a boiler backsplash.
Easy step-by-step guide on how to install a boiler
Installing the new unit: This step is best done the same day you remove the old boiler and its obsolete pipes; It’s best to buy new ones, but you can always clean and wash the pipes thoroughly to be ready for the new one. The boiler must be mounted accordingly in the same place or scaled depending on the size; you need to connect the unit to pipes and pumps, then to radiators, water supply and other outlets. Depending on the type of boiler, you may need to connect water storage tanks for hot and cold water.
The Controls: Once you have done the hard work, you now need to connect it to the electrical control unit. This is useful for anyone who wants the ease of access to change the home’s central heating without going straight to the boiler room.
Test it: At this point you’re good to go, so it’s time to make sure everything was done correctly. Start the boiler and test the waters to see if everything is working as expected. Check thermostat levels and every faucet and shower in the house, also testing the central heating system. Go back to the boiler and notice if there is anything not working, then when you see that everything is secure and ready, you are ready to enjoy this newly installed boiler heating system.
Whether you hire a professional to install it or do it yourself, you will have a decent heating system that can provide multiple uses. This boiler can heat the water coming out of your faucets and shower, it can keep your pool warm, you can steam clean your carpets, and it can warm the air in your home. So it is a great addition to your home and worth all the money spent if you find the right one for your needs.