Ink pads and stamps can be used together to embellish anything from a handmade card to a decorative box. Ink pads are available in a wide range of colors and inks. The ink can be permanent or washable. Over time, ink pads may begin to dry out. Instead of throwing them away, it is best to re-ink them using an ink or pigment refill kit.
Check for defects
Before you can refill an ink pad, you must first inspect it for defects. If there are tears or imperfections in the stamp itself, it is best to replace the ink pad. If the buffer is in good condition, consider refilling it.
Choose a refill
Many ink pad manufacturers now offer refill ink that matches their ink pad line. When you have a dried out ink pad, start by checking the manufacturer name and color of the ink pad. Check if there is a specific refill for this ink pad, as it is best to purchase the coordinating ink refill. If there is no matching ink, look for a different brand in the same color. It’s easier for black, brown, and primary colors because they tend to be closer together than custom colors.
Inspect the refill
Stamp ink refills usually come in small plastic bottles. Below the screw cap is a small opening for dispensing ink. Store your ink refills upright and with the cap firmly in place to prevent leaks. An ink refill should allow you multiple uses, depending on the size of the stamp and the ink needed to rejuvenate it.
Refilling the ink pad
Once you have determined that your ink pad is in good condition and you have replacement ink available, you can go ahead and refill your ink pad.
Step 1
Open your ink pad and lay it flat on a table.
2nd step
Remove the cap from the ink bottle. Flip the bottle along the top edge of the ink pad. In a zigzag motion, begin flowing the ink back and forth along the length of the ink pad, pressing lightly as you go. Repeat this several times until you feel the buffer is well saturated.
Step 3
When you think you have added enough ink, use your stamp to do a test stamping. If the pad is dark and even, you’re done. Otherwise, repeat step 2 and stamp again.
Warning
Be sure to read the manufacturer’s instructions on the refill bottle. If they differ from these instructions, always follow the manufacturer’s instructions first.
Ultimately, you should know that re-inking an ink pad that has dried is not difficult. You simply have to follow the different steps. In addition, you should also take the trouble to buy a good quality ink pad. There are several that can perfectly meet your expectations.
All the materials for the ink pad
You might have guessed it before reading this article, but now you know it for good: to re-ink a stamp that has dried, you simply need a refill. That’s the whole problem with ink. When we use it, it is good so that it dries on the paper, or the canvas. But the problem is that by drying where you put it, when writing or drawing, it dries just as much in the device you used. We know, for example, that Rotring markers, which all professional illustrators and designers use, because of the fineness of the lines they offer, must be used several times a week, so as not to get damaged. This is the advice you receive when you buy an instrument of this ilk. Given the price it costs, it is obvious that no one wants to see their mine dry out and become unusable; after just one use!
As for ink pads, it’s the same problem, which is why it is recommended to have everything at your disposal. the material for your ink pad, when you buy one. This gives your tampon a longer lifespan, which at the same time means that you will not have to buy another one at short notice. In the digital age, many people no longer use ink at all, even among illustration and drawing professionals. They prefer to use computer equipment because it is precise, reliable and easy to use most of the time. Yet many are returning to ink. The same goes for companies which opt for electronic signature but which realize, after a time, that the ink pad remains very useful.