When a commercial boiler breaks down or malfunctions, it can cause significant disruption to the facility it is used to heat. For example, in an office environment it is important that staff members are sufficiently warm, and the same goes for any building that requires heating and hot water.
Seeking help from a qualified Paris 13 heating engineer is usually the best solution if you discover a problem with your commercial boiler, but if you are only experiencing minor problems you may be able to repair it yourself. In this blog we explain some of the common causes of boiler problems and how to avoid or fix these problems, and we look specifically at how to repair a boiler leak.
How to Fix a Broken Boiler
Commercial boilers can experience a range of problems, including the following…
Low system pressure
If your commercial boiler shows low system pressure, it could lead to a complete breakdown. To prevent this from happening, carry out regular checks on the pressure gauge, and if you notice any significant changes, seek help from a qualified engineer.
Poor heat production
Often caused by internal blockage of debris, a reduction in heat output is unlikely to cause catastrophic problems, but it will reduce the effectiveness and efficiency of your boiler. You should ensure that your boiler is cleaned regularly to prevent a build-up of debris from affecting the efficiency of your boiler.
Strange sounds
Commercial boilers often make noise, and in many cases this is nothing to worry about. However, if they make a hissing or clicking sound, there could be a potentially serious problem. This could be due to low water pressure or limescale buildup. To see what’s behind the problem, you can check that the air intake, exhaust, pressure, and piping are all in good condition. Otherwise, they will need to be replaced.
Unexplained stop
Whether your commercial boiler is showing weird water pressure readings, the thermostat is faulty, or simply isn’t working properly, the best course of action is to seek the advice of a qualified heating engineer. There are a number of problems that can cause your boiler to stop working, so it can be difficult to know what the right solution is. As such, it would be advisable to seek help from an expert.
How to Fix a Leaking Boiler
A common problem with commercial boilers, leaks can be as minor as a few insignificant drops of water or serious enough to cause serious damage to your system. The important thing is to quickly identify a leak and find an effective solution to prevent further damage. To do this, you must regularly check for possible leaks coming from your heating system. For added safety, you can even install a sensor that will alert you if the bottom of the boiler contains water.
There are several reasons why your boiler commercial may leak. For example, a build-up of pressure could have caused the pressure relief valve to leak water. To resolve this problem you may need to close the valve, descale it or completely purge the boiler. If the temperature and quality of the water entering the commercial boiler is not properly regulated, the problem could be thermal fatigue. If the water entering the boiler is too cold, thermal shock can cause cracks in the system. If the water is too hot, cracks could begin to appear on the boiler, eventually leading to a complete breakdown.
Another potential cause of a leak could be rust or corrosion. In older commercial boilers this is perfectly natural and annual servicing should indicate whether the boiler needs to be replaced. However, poor water quality can also be the cause of damage inside the boiler. You should be able to spot it during routine maintenance by observing the condition of pipes and other areas where water passes through.
How to Fix a Leaking Boiler Pipe
When a pipe in your commercial boiler system begins to leak, it can cause significant damage and dangerous repercussions. Even if you need to hire a qualified professional to examine the system or need to hire a temporary replacement boiler, there are some tips that can help you prevent the leak from damaging the building it is in or putting anyone nearby. hazard.
As a commercial boiler operator, you can repair a leaking pipe in:
- cut off the water supply
- turn off the boiler
- draining remaining water from the system
- clean up the damage caused by the leak
- Identifying the Leaking Pipe – If it’s just not installed correctly, you may be able to tighten it in place. If it is easy to remove, replace it with a pipe of the same size. Or, if there is a clear leak but cannot be removed, coat the leak with waterproof PTFE tape and contact a qualified engineer.
If your commercial boiler is damaged and you need a temporary replacement while it is repaired or a permanent replacement is installed, Artisans Bruno provides the right solution with the name boiler maintenance Paris 13